Skip to content

Write and send a campaign email, and see its results

A campaign is an email you send to your campaign contacts, such as a newsletter or a seasonal offer. You build it from simple pieces (a heading, text, an image, a button and so on), see exactly how it will look, greet each person by name, send yourself a test, and then send it to your list.

  • You need the AysOps Mail Campaigns add-on, and the Manage contacts and send campaigns permission (owners, administrators and managers have it).
  • To send a test, connect your own mailbox in Settings, Email. Campaigns are always sent through your own mailbox, never through AysOps.
  • Add your business address in Settings, Profile. Canadian anti-spam law (CASL) requires it in every campaign, and AysOps adds it to the bottom of every email for you.
  1. Go to Campaigns. The Campaigns tab lists your campaigns.
  2. Press New campaign, give it a name (only you and your team see the name) and press Create.
  3. Enter the Subject your contacts will see, and optionally a Preview text, the short line many inboxes show after the subject.
  1. The email starts with a greeting and a paragraph. Change the text, or remove a piece with the bin button.
  2. Under Add a block, add what you need: Heading, Text, Image, Button, Two columns, Divider or Space. Use the arrows to move a piece up or down.
  3. In a Text block, a blank line starts a new paragraph, words between two stars become bold, and a web address becomes a link.
  4. For an Image, press Choose image, then pick one you uploaded before or press Upload an image. Large photos are made smaller, and the information about where a photo was taken is removed. Describe the image in a few words: that text shows when someone has images turned off.
  5. For a Button, enter its text and the web address it opens, and choose a colour.
  6. Press Save. If you try to leave with changes that are not saved, AysOps asks Leave without saving? first; Stay on this page keeps your work.

If your company has AysOps AI, a draft shows Design with AI. Press Upload a design and choose a picture (JPG or PNG) or a PDF of an email or flyer you like. AysOps AI turns it into blocks you can change: headings, text, buttons and images. From a picture, the photos are cut out and added for you; from a PDF, each image block is left empty for you to choose a picture. If you have already changed the email, you are asked first whether to replace it. Nothing is saved until you press Save, so check every word and link before you send. It uses AI credits.

  1. Click in the subject or a text box where the name should go, and press Insert field.
  2. Choose the field, such as First name, and optionally what to show when someone has none (for example there, so they see “Hello there”).
  3. Press Insert. The field appears in the text as {{first_name|there}}; each contact sees their own name.
  1. The preview on the right shows the email as it will arrive. Switch between Desktop and Phone.
  2. Use View as to see it as one of your contacts, or as Someone with no name. The list starts with your first few contacts; type part of a name or email address in Find a contact to find anyone else. On a campaign that has been sent, the list is the people it went to (View as someone it went to), not the contacts you have today.
  3. Under Send a test, choose yourself or someone on your team, and press Send test. The subject starts with [TEST]. Unsaved changes are saved first.

Under the subject, Track clicks is ticked for a new campaign. With it on, the links in your email go through a short tracking address first, so you can see who pressed them. Untick it if you would rather not know. You can change it until you send.

Whether an email was opened is not tracked: many mail apps open every email automatically, as soon as it arrives, so it would count people who never read it.

Under Track clicks, Footer contact chooses what shows under your address at the bottom of the email: your Email, Phone and Website. Tick one, two or all three. They come from Settings, Profile, so change the details there.

  • A box you cannot tick says, for example, Add a phone in Settings, Profile: fill it in there first.
  • At least one box stays ticked. The law requires a way to reach you besides your address.
  • The preview changes as you tick, and your choice is saved with Save.
  • A new campaign starts with the same choice as your last one.
  1. Press Send to your list. Unsaved changes are saved first. Anyone who signed up through your sign-up form and is waiting for room joins the list first, if there is room now.
  2. AysOps checks the email and your list. Anything under Fix these first must be fixed before it can be sent: for example no subject, no mailbox connected, no business address, no way to reach you in the footer (tick a Footer contact you have filled in under Settings, Profile), a field that is not in your list, or more contacts ready to email than your plan allows (add a block, or remove contacts, then send).
  3. Read any warnings (for example a subject in capitals, or contacts skipped because their consent ran out). To send anyway, tick Send anyway.
  4. The popup shows how many contacts it goes to and about how many days it takes. Press Send to and the number.
  5. The campaign shows Sending, with how many were sent and how many are still to send.

Once a campaign has started, Results shows under the progress:

  • Sent and Clicked, with the share of emails sent;
  • Unsubscribed: people who used the unsubscribe link in this email, or their mail app’s Unsubscribe button;
  • Refused and Skipped, with the reasons;
  • Clicks per link, and the refused addresses with what their mail server said.

Press Download CSV for a spreadsheet with one row per email.

Opens are not shown, for the reason above. A click is something a person did.

  • Press Pause to stop for now, and Resume to carry on.
  • Press Cancel campaign to stop for good. Emails already sent stay sent; the rest are not sent. This cannot be undone.
  • Every campaign ends with your business name, address, the ways to reach you you ticked under Footer contact, an Unsubscribe link, and a small Powered by aysops.com line (these last two are centred). These are added for you and cannot be removed: the law requires the address and the unsubscribe link.
  • A yellow note under the preview warns about a field that is not a column in your contact list, about contacts who have that field blank when you did not add an “if blank” word, about a missing business address, and when none of the ticked footer contacts is filled in.
  • You can send up to 5 tests of a campaign an hour.
  • Only a draft can be changed or deleted.
  • Campaigns go out slowly, a few every few minutes: about 35 an hour during your working hours and 90 an hour in the evening and overnight, and never more than half of what your mailbox may send in a day. If you connected your own mail server (SMTP), AysOps looks up the daily limit your provider publishes on its website; until one is found, a mailbox is treated as able to send 500 a day. A mailbox that has never sent a campaign starts slower for its first three weeks. For now, AysOps also sends at most 50 campaign emails per company per day.
  • Your invoices and other emails always go first: campaign sending waits while they go out.
  • Contacts who unsubscribe, are removed, or whose consent runs out while a campaign is sending are skipped.
  • AysOps tells you, on your to-do list and by email, when a campaign pauses by itself and when it finishes.
  • Your campaign is paused: the reason is shown on the campaign, with what your mail server (or AysOps support) said. Common reasons:
    • your mail provider said the mailbox reached its sending limit (the campaign resumes by itself in 24 hours, more slowly);
    • several addresses in a row were refused (your list may have old addresses; check it, then press Resume);
    • AysOps could not sign in to your mailbox (fix it in Settings, Email, then press Resume);
    • the footer has no way to reach you, for example the phone number was removed from Settings, Profile while the campaign was sending (fill it in again, then press Resume);
    • your mail provider refused the email (read its message, then press Resume);
    • AysOps support paused campaigns for your company (contact support: Resume does not work until support lifts the pause).
  • Someone else changed this while you were editing it: a teammate saved the campaign after you opened it. Press Reload to see their version, then make your change again.
  • This campaign was changed in another tab or by someone else, so it wasn’t sent: you pressed Send in a tab that was out of date. Nothing was sent. The page now shows the latest version: check the changes, then send again.
  • Connect your mailbox first: set up your email in Settings, Email, then send the test again.
  • “Apple does not allow campaigns to be sent through iCloud Mail. Connect a business mailbox instead.” or “Campaigns cannot be sent through a personal mailbox. Connect a business mailbox instead.”: campaigns can’t go out through an iCloud mailbox or another personal mailbox. Connect a business mailbox in Settings, Email. A free Gmail or personal Outlook mailbox can send, but only a small number a day.
  • Your mail server did not accept the test: the message from your mail provider is shown. Check your mailbox connection in Settings, Email.
  • The link must start with https://, mailto: or tel:: buttons and image links must open a web page, an email or a phone number.