Build your campaign contact list
What this does
Section titled “What this does”AysOps Mail Campaigns sends email campaigns, such as a newsletter or a seasonal offer, through your own mailbox. The people you send to are your campaign contacts: a list of their own, separate from your customers. This article covers building that list, on the Contacts tab. Writing and sending a campaign is covered in Write and send a campaign email.
Canadian anti-spam law (CASL) only allows campaign emails to people who agreed to hear from you, or who bought from you or asked about your services recently. AysOps keeps track of that for every contact, and only emails the ones it can.
Before you start
Section titled “Before you start”- You need the AysOps Mail Campaigns add-on, and the Manage contacts and send campaigns permission (owners, administrators and managers have it).
- The first time, AysOps asks you to confirm: These contacts agreed to hear from my business. I did not buy or rent this list. Tick it and press Confirm. The buttons to add contacts appear after that.
Upload a spreadsheet
Section titled “Upload a spreadsheet”- Go to Campaigns, open the Contacts tab and press Upload a list.
- Choose a .csv or .xlsx file with a column of email addresses (up to 5,000 rows). Names, a date column and any other columns are read too.
- Check that each field points at the right column. If no column was found for the email address, choose it.
- Review what AysOps found. Some rows are always skipped: anything that is not an email address, an address that
appears twice, someone already on your list, and anyone who unsubscribed before (an upload never signs anyone
up again). A row whose name starts with = + - or @ is skipped too, with its row number: a spreadsheet would run
that name as a formula. Remove that first character in your file.
- If a date is in the future or cannot be read for certain (03/04/2026 could be March or April; write 2026-04-03), the contact is added without a date, and the rows are listed so you can fix them.
- Under How names will be saved you see how a Full name column is split: at the first space, so Mary Ann Smith becomes first name Mary. If that is wrong for your list, add First name and Last name columns to the file and choose them.
- Decide about the rows AysOps flagged: addresses that look misspelled (with a suggestion), shared addresses such as info@ or sales@, and addresses whose domain does not seem to receive email. Tick to keep them.
- Answer How did you get these contacts? If they bought from you or asked about your services, choose the date column too: consent counts 2 years from a purchase and 6 months from an enquiry, so without a date they are added but not emailed.
- Press Add contacts.
Add your customers
Section titled “Add your customers”- Press Add from customers. AysOps shows how many customers with an email address can be added.
- Consent comes from your own records: a paid invoice in the last 2 years, or a quote or appointment in the last 6 months. Customers with neither are added but not emailed until you set it.
- Press Add and the number (for example Add 120).
Add one person
Section titled “Add one person”- Press Add a contact, enter the email address and name, and answer how you got the contact.
- Press Add contact.
Change, remove or erase a contact
Section titled “Change, remove or erase a contact”- Press Edit beside a contact to change the name or the consent, or to Erase contact.
- Tick several contacts to Set consent, Remove from list or Mark unsubscribed all at once. Removing more than one contact asks you first, with the number. The list shows 50 contacts at a time; press Show more for the next ones. Select all ticks every contact in the tile and search you are looking at, including the ones not shown yet, and you can untick any of them. If your list changes before you press the button (for example someone unsubscribes), nothing is changed and you are asked to check the list and select again.
- Removed by you keeps the contact off the list; you can put them back from that tile.
- Mark unsubscribed is for someone who asked you directly to stop. It cannot be undone: only they can sign up again, through your sign-up form.
- Erase contact deletes the name and address. A one-way code of the address is kept so the person is never emailed a campaign again.
Contacts with no clicks recorded
Section titled “Contacts with no clicks recorded”After someone has been sent 6 or more campaigns with Track clicks on, and did not click a link in any of them, a tile No clicks recorded appears. It is only a suggestion: nothing changes unless you choose.
- Press the tile to see those contacts.
- Tick the ones you want to decide about, then:
- Keep sending: they stay on the list and are not shown here again until 6 more campaigns pass with nothing recorded;
- Remove from list: they stop getting campaigns, and you can put them back from Removed by you.
No click does not mean they are not reading: many people read without clicking.
How many contacts your plan includes
Section titled “How many contacts your plan includes”Your Mail Campaigns plan includes 500 contacts ready to email. Each block you add gives you 500 more. Only contacts on your campaign list who are ready to email count: people waiting for a consent choice, whose consent ran out, who unsubscribed or whom you removed do not. Your customers are never counted, and you can always add as many customers as you like.
The Contacts tab shows how many of your contacts are ready to email and how many your plan allows. When you are close to the limit, it says so. A change that would go over it (an upload, adding your customers, adding one person, giving people consent or putting removed contacts back) is not made, and you are told how many contacts it would have made ready and how many blocks to add. Nothing is added or charged on its own: the account owner adds a block on the Add-ons page (Add-ons in the left menu), and then you try again. Removing or unsubscribing contacts is never limited.
Add or remove blocks of 500
Section titled “Add or remove blocks of 500”Click Add-ons in the left menu and, on the Mail Campaigns card, press Add a block. Each block adds 500 contacts for US$2.99 or CA$3.99 a month, charged now for the rest of your billing period (free during your free period). Only the account owner can add or remove blocks.
To remove blocks, press Remove blocks. The removal takes effect at the end of the period you already paid for, with no credit, and you keep the room until then. If you have more contacts ready to email than the new limit, remove or unsubscribe some first. Changed your mind? Press Cancel removal. Turning Mail Campaigns off ends its blocks too.
What happens next
Section titled “What happens next”The tiles at the top show how many contacts are ready to email, how many need a consent choice, whose consent expired, who unsubscribed and who you removed. Press a tile to see those contacts.
People can also add themselves through your sign-up form. If your list is full when they confirm, they show as Waiting for room: they are not emailed and do not count toward your plan, and they join your list by themselves as soon as there is room.
Every campaign includes an unsubscribe link and the unsubscribe button that Gmail and Outlook show. Someone who unsubscribes is never sent a campaign again. It does not stop invoices, receipts or other email about their dealings with you.
Keep a copy of your list. Press Download the list above the contacts to save every contact as a spreadsheet file, with each person’s consent, whether they unsubscribed, and whether you removed them. Keep the unsubscribes with the list if you use it elsewhere: those people asked not to be emailed. If you ever turn Mail Campaigns off, your contacts are kept but locked until you turn it back on, so download the list first if you need it.
If something goes wrong
Section titled “If something goes wrong”- “Please confirm that these contacts agreed to hear from your business”: tick the agreement at the top of Campaigns first.
- “That address unsubscribed from your campaigns”: the person unsubscribed. Only they can sign up again.
- A contact shows “Consent not known”: choose it, press Set consent, and answer how you got them.
- “Older .xls files cannot be read”: open the file in Excel and save it as .xlsx or .csv.
Related articles
Section titled “Related articles”- Write and send a campaign email, and see its results
- Let people sign up for your emails from your website
- Add-ons explained: turn features on and off
